Bath Supplier Freestanding bathtub Cheap price Acrylic Bath tub 9002

1. Specific steps for installation of embedded bathtub
(1) After the completion of the pipeline, the slotted part shall be repaired to be waterproof, and a 24-hour water storage test shall be conducted to ensure no leakage;
(2) Laying and completion of bricks in accordance with normal procedures;
(3) install the bathtub: lay foam bricks on the bathtub. The height of the bathtub is usually within 600mm. Connect the upper and lower water pipes and keep them unblocked. Then, foam bricks are used to build walls and plastering them. Pay attention to the maintenance hole at the corresponding position of the downpipe, about 250x300mm;
(4) You can use the same style of wall tiles, mosaic, artificial stone, marble and stainless steel according to your favorite style.

2. Precautions for installing embedded bathtub
(1) The low wall or stiffener around the bathtub shall have sufficient supporting force, and the surrounding sand shall be compacted. In addition, do not use bricks or other hard objects to support the bottom of the bathtub, so as not to damage the glaze during use. Finally, the bottom of the bathtub and all corners of the bathtub should contact all sides with uniform force;
(2) Pay attention to the close connection between overflow pipe and drainage pipe;
(3) When installing tiles, please leave a drainage inspection opening. In order to look good on the surface, you can use glue to paste the tiles on the manhole so that they can not be seen from the outside, and the tiles can be easily removed during the overhaul.
(4) Before placing the bathtub, please install water fittings and conduct a 24-hour closed water test to check whether there is water leakage at each joint.
(5) When placing the bathtub, make sure that one end of the drain is slightly lower than the other. The outer end shall be slightly lower than the inner end.
(6) The actual size of the bathtub may not be exactly the same as the nominal size. When purchasing and installing, please measure on site first and keep normal tolerance to facilitate installation.
(7) The downpipe should preferably be slightly inverted S-shaped to prevent aftertaste.
The rise of embedded methods allows the maximum release of family space. Nowadays, the built-in ground bathtub has gradually entered our life and become the current trend.

The embedded bathtub is an amazing bathtub design concept, and the overflow embedded bathtub on the ground redefines the luxury life. The built-in ground bathtub is a fully open space, using many natural elements, such as wooden floors or pebbles on the edge as the boundary around the bathtub. The surrounding environment is also full of natural flavor, with large French windows and various outdoor flowers.